
Natural pozzolan is a naturally occurring siliceous or siliceous-aluminous material that reacts with calcium hydroxide in the presence of water to form compounds with cementitious properties.
It is widely used as a Supplementary Cementitious Material (SCM) in cement and concrete applications.
When properly characterized and incorporated into suitable mix designs, natural pozzolan can help improve concrete durability, reduce permeability, contribute to long-term strength development, and partially replace Portland cement clinker.
Natural pozzolan is an important raw material for manufacturers seeking alternative cementitious materials and more resource-efficient construction solutions.
Our natural pozzolan is intended for evaluation and potential use in the following industrial applications:
Cement Manufacturing: As a supplementary raw material for blended cement production.
Portland Pozzolan Cement (PPC): As a pozzolanic component in cement formulations.
Ready-Mix Concrete: For concrete mix designs requiring supplementary cementitious materials.
Precast Concrete: For industrial concrete products and precast applications.
Infrastructure Projects: For bridges, roads, dams, marine structures, and other major construction works.
Construction Materials: As a potential mineral additive in selected cement-based products.
Final suitability depends on laboratory test results, applicable standards, and the buyer’s technical requirements.

One of our key advantages is our single-origin sourcing strategy.
Our natural pozzolan comes from one designated deposit in:
Krueng Raya, Aceh Besar, Aceh Province, Indonesia, near Malahayati Port, Banda Aceh.
Unlike suppliers who aggregate raw materials from different deposits or geographical locations, SMN Indonesia focuses on sourcing from a single designated origin.
This approach provides several advantages:
Consistent geographical sourcing.
Better control over raw material characteristics.
Reduced exposure to variations between different deposits.
Easier traceability of material origin.
More systematic batch monitoring and quality management.
Although natural geological materials may exhibit inherent variations, our single-origin sourcing strategy, combined with material homogenization and laboratory testing, helps maintain more controlled and consistent product quality.
Our natural pozzolan deposit is located in Krueng Raya, Aceh Besar, near Malahayati Port, Banda Aceh, Indonesia.
This strategic geographical position supports efficient transportation planning from the sourcing area to the export loading port.
Export Loading Port: Malahayati Port, Banda Aceh, Indonesia.
We can discuss suitable loading arrangements, bulk shipment requirements, and export logistics according to the buyer’s destination and order volume.
SMN Indonesia is prepared to support industrial-scale procurement requirements through its sourcing and supply network.
Target monthly supply capacity: Up to 25,000 MT.
Suggested bulk order quantity: 8,000–12,000 MT.
Shipment arrangement: Bulk cargo.
Loading port: Malahayati Port, Banda Aceh, Indonesia.
Delivery terms: FOB, subject to mutually agreed contractual arrangements.
Actual production readiness, cargo availability, and shipment schedules will be confirmed during order negotiation.
Quality consistency is essential for cement manufacturers and industrial buyers.
Our quality control approach focuses on:
Raw material sourcing from a single designated origin.
Material homogenization before shipment.
Representative sampling and laboratory analysis.
Verification of chemical and physical properties.
Documentation support for buyer evaluation.
Laboratory reports and product specifications can be provided to prospective buyers for technical assessment.
SMN Indonesia aims to offer competitive natural pozzolan pricing directly through its Indonesian sourcing and supply network.
Our commercial quotations are determined by order quantity, technical specifications, loading arrangements, packaging requirements, and destination logistics.
We understand that every cement manufacturer and industrial buyer has specific technical requirements.
The following table presents our indicative product specification profile. Final contractual specifications must be confirmed against the applicable laboratory Certificate of Analysis (COA) for the offered material.
| Parameter | Indicative Specification |
|---|---|
| Silicon Dioxide (SiO₂) | ≥ 65% |
| Aluminum Oxide (Al₂O₃) | 10–15% |
| Iron Oxide (Fe₂O₃) | 4–8% |
| Calcium Oxide (CaO) | ≤ 5% |
| Magnesium Oxide (MgO) | ≤ 3% |
| Loss on Ignition (LOI) | ≤ 8% |
| Fineness (Residue on 45 μm sieve) | ≤ 10% |
| Moisture Content | ≤ 1% |
| Specific Gravity | 2.3–2.6 |
| Color | Light Grey to Reddish Brown |
Note: These figures are indicative and subject to verification against current laboratory results. Buyers should request the latest COA and detailed Technical Data Sheet (TDS) before confirming product suitability.
To support technical evaluation and procurement procedures, SMN Indonesia can provide relevant product documentation, including:
Certificate of Analysis (COA).
Technical Data Sheet (TDS).
Material Safety Data Sheet (MSDS/SDS).
Chemical composition and laboratory test reports.
Particle size distribution and sieve analysis, where available.
Product photographs and material documentation.
Loading and shipment documentation, as applicable.
Natural pozzolan qualification depends on its intended application and the applicable purchasing specification.
Relevant standards for buyer evaluation may include:
ASTM C618 – Specification for coal fly ash and raw or calcined natural pozzolan for use in concrete.
ASTM C1945 – Standard Specification for Natural Pozzolan for Use in Concrete.
EN 197-1 – Cement composition, specifications, and conformity criteria.
Compliance or certification against any particular standard must be established through the relevant test results and qualification process. Buyers are welcome to share their required standards for technical evaluation.
SMN Indonesia understands the importance of dependable supply arrangements, transparent commercial terms, and export documentation.
Our general supply framework is outlined below:
| Commercial Details | Supply Information |
|---|---|
| Supplier | PT Sepakat Multi Niaga |
| Product | Natural Pozzolan |
| Country of Origin | Indonesia |
| Material Source | Krueng Raya, Aceh Besar |
| Sourcing Strategy | Single-Origin |
| Loading Port | Malahayati Port, Banda Aceh |
| Target Supply Capacity | Up to 25,000 MT/month |
| Suggested Order Quantity | 8,000–12,000 MT |
| Shipment Type | Bulk Cargo |
| Incoterms | FOB Malahayati Port |
| Lead Time | Approximately 4 weeks after order confirmation, subject to production and vessel arrangements |
| Payment Terms | Negotiable by mutual agreement |
Our team can coordinate supply and shipment planning based on the buyer’s requirements.
We welcome inquiries concerning:
Bulk vessel shipments.
Cargo quantity and loading capacity.
Vessel suitability and loading arrangements.
Port documentation and export procedures.
Shipment scheduling.
Destination port requirements.
Final logistics arrangements will be confirmed following technical and commercial discussions.
Are you looking for a natural pozzolan supplier in Indonesia for your cement manufacturing facility, concrete production, or infrastructure project?
SMN Indonesia welcomes inquiries from:
International cement manufacturers.
Cement and concrete producers.
Construction material distributors.
Infrastructure project contractors.
Industrial mineral importers.
Global commodity trading companies.
Send us your product requirements and procurement details. Our team will review your inquiry and provide relevant product information and a competitive commercial proposal.
To receive a quotation, please provide:
Required quantity (MT).
Required chemical and physical specifications.
Destination port.
Preferred Incoterms (FOB, CFR, or CIF).
Expected shipment schedule.
